tensile strength
音标发音
- 英式音标 [ˈten.saɪl ˌstreŋθ]
- 美式音标 [ˈten.sɪl ˌstreŋθ]
- 英式发音
- 美式发音
基本解释
- [力] 抗张强度
英汉例句
- Marriage is love's crucible -- it has the tensile strength to contain the heat of self-transformation.
婚姻是爱的坩埚——它拥有承受高温的抗张强度。 - The conduit is filled with concrete, which provides compressive strength, and steel rods along the bottom of the tube provide tensile strength.
拱形管道内部填充的混凝土提供抗压强度，沿矩形框架底部铺设的钢棒提供抗拉强度。 - Bamboo has incredible tensile strength, meaning that it can withstand significant amounts of stress and is comparable to steel’s tensile strength.
竹子有着不可思议的抗拉强度，也就是说它可以承受巨大的压力，可以与钢铁的抗拉强度相媲美。 - As such, it possesses the novel mechanical properties of carbon nanotube-like tensile strength--in addition to high electrical conductivity.
FORBES: Five Technologies Set to Change The Decade - And scandium aluminium bats are even lighter for the same tensile strength so can be swung that bit faster.
FORBES: Amazon UK's Soaring Baseball Bat Sales - We're also continuing to see innovation in traditional bikes, like UBC GmbH's Coren bike, which is made of high tensile strength T1000 carbon fibers.
ENGADGET: Inhabitat's Week in Green: Bicymple, computer-age fossils and an underground mushroom tunnel
双语例句
权威例句
词组短语
- tensile splitting strength test 拉裂强度试验;劈裂法试验
- tensile bonding strength 的抗张粘接强度;抗张粘接强度
- hoop tensile yield strength 环向拉伸屈服强度
- tensile tensile strength 断裂强度
- tensile compressive strength 抗拉强度
短语
英英字典
- the ability of a material or object to be stretched or pulled without breaking
- a measure of the ability of a material to withstand a longitudinal stress, expressed as the greatest stress that the material can stand without breaking
剑桥英英字典
柯林斯英英字典
专业释义
- 抗拉强度
Tensile strength does not change much after purification, but elongation rate is increased obviously.
复合净化后铝硅合金铸坯抗拉强度的变化不大，延伸率得到明显提高。 - 力学性能
It has been demonstrated that the integral grain refinement is the effective method to improve the low cycle resistance and high tensile strength of the cast within the medium temperature ranges.
晶粒细化是提高中低温工作条件下高温合金铸件低周疲劳寿命和力学性能的有效途径之一。 - 拉伸强度
Joint tensile strength was high, generally 95% of base metal.
接头拉伸强度较高,一般为母材95%左右。 - 拉伸性能
The tensile strength and ductility of the Ni-TaC 16 composites at room temperature is obviously improved with increasing the volume fraction of TaC and decreasing the inter-rod spacing and the diameter.
Ni-TaC16共晶自生复合材料室温拉伸性能，随着纤维体积分数的增加和纤维间距与尺寸的减小而提高。机械工程
- 拉伸强度
Besides, carbon fibres single tensile strength decreased by 4.4% at the 200℃SCCO2 treatment.
此外单丝拉伸强度在处理后有所下, 200℃处理时,强度下降4.4%。 - 抗拉强度
The tensile strength of specimens containing fibers of 0.35 volume fraction reaches up to 1050MPa.
试样的抗拉强度在纤维体积分数为0．35时达1050MPa。 - 断裂强力
Research shows that weave is the important factor in influencing wrinkle resistant property and tensile strength before and after finishing. Different weave has different properties.
通过研究不同组织对整理前后织物性能的影响,发现:组织不同,整理前后折皱回复性和拉伸断裂强力显著不同。 - 抗张强度
- 拉伸性能
The result showed that the tensile strength and Vicat softening temperature was increased. Notched impact property of PVC/ABS composite was decreased with the glass fiber added.
研究结果表明:随着玻璃纤维添加份数的增加,PVC/ABS合金的拉伸性能和维卡软化温度有不同程度的提高,缺口冲击强度有所下降。医药科学
- 粘结强度
- 断裂强度
Mesoscopic and microscopic characterization parameters include tensile strength and work of fracture of fibers,glass transition temperature,rate of dissolution etc.
进一步可对构成管壁的介观结构的纱线和纤维单元以及微观结构的高聚物大分子构象的变化进行表征,选择的主要特征指标为纤维的拉伸断裂强度、断裂功,玻璃化转变温度、溶解速率等参数在疲劳实验前后的变化。物理学
- 抗拉强度
- 拉伸强力
- 伸张强度
- 拉力强度
- 抗张强度
- 抗张强度
- 抗拉强度
- 拉伸强度
- 抗张强度
- 张力强度
- 抗拉强度
- 断裂应力